southerndownhill.com - Forum

General => Kit and equipment => Topic started by: Addict on May 14, 2008, 21:32:23 PM



Title: Maxxis Ignitor for DH?
Post by: Addict on May 14, 2008, 21:32:23 PM
I've looking to get a fast rolling UST rear tyre that grips well for the Mega/Les 2 Alps and came across this LUST ignitor http://www.chainreactioncycles.com/Models.aspx?ModelID=17345

Seen positive comments but not from many who have used them for DH. Anyone used them for DH?

May go for an this on the rear and a minion DHF ST 2.5 on front!


Title: Re: Maxxis Ignitor for DH?
Post by: jake-snake on May 14, 2008, 21:35:54 PM
I have these in ust they are a very good all round UK tyre
I reckon they are not man enough for the alps unless your an xc dude


Title: Re: Maxxis Ignitor for DH?
Post by: Rootes on May 14, 2008, 22:05:36 PM
Semi slick HR on the back for the Mega.= with a normal roller, or DH16 on the front, that's what I ran last year.

DH sidewalls for pinch protection, although mine were tubeless...

Rootes


Title: Re: Maxxis Ignitor for DH?
Post by: Addict on May 15, 2008, 09:53:35 AM
Cheers but i cant find a hr semi slick for ust so i take it you had a tubeless converion. What do reckon for minion dhfs at the mega front and back? cheers tom


Title: Re: Maxxis Ignitor for DH?
Post by: Rootes on May 15, 2008, 09:59:32 AM
I used the Michelin equivalent semi slick - http://www.chainreactioncycles.com/Models.aspx?ModelID=8527

That is UST, and spot on IMO. Either that or normal HR/DH16 with the middle nobs cut down.

I've never used Minions on any bike so cant comment there :)

Rootes


Title: Re: Maxxis Ignitor for DH?
Post by: Addict on May 15, 2008, 16:35:54 PM
Thanks did you use that for other riding and the sprint race aswell?

I cant be assed to change tyres while im there guess I might have to!

What width do you think I should go for up front will a 2.35 be alright?

Cheers Tom


Title: Re: Maxxis Ignitor for DH?
Post by: rookie on May 15, 2008, 17:24:12 PM
i tried a semi slick kenda short tracker for the mega which has a dh casing and it`s 2.5 but struggled for grip, it just slid when braking, took it off and put a maxxpro high roller on and it felt much more confidence inspiring and still roled quite well.


Title: Re: Maxxis Ignitor for DH?
Post by: Addict on May 15, 2008, 19:38:31 PM
thanks, new plan now is for a Continental Vertical Pro UST 2.3 on the back, at least for the Mega