ok....2 questions
Firstly...i have a pair of totem coils. The coil side has a leaking seal, and i was wondering if i can use a 10wt oil in the leg, as the oil is only used for lubrication IIRC.......i know its meant to be 15wt oil, but i was just wondering.
Secondly...i use TF2 or GT85 to dispense any water from my chain after a wet ride/ cleaning session. This however leaves my chain MEGA-oily....
Apart from degreasing my chain....is there anything else i could use to either disperse the water, or remove some of the oil from my chain??
Cheers








Author


Logged








