southerndownhill.com advertisement.png, 0 kB
Welcome, Guest. Please Login or Register.
December 01, 2008, 14:52:18 PM
Show unread posts since last visit.
Forum Help Calendar Login Register
News: Southerndownhill.com Is Now Under New Ownership!
 

+  southerndownhill.com - Forum
|-+  General
| |-+  Technical Advice (Moderators: Col @ FLi, Mop Head)
| | |-+  Crown race.. :/		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Crown race.. :/  (Read 230 times)
Robington
Full Member
***
Offline Offline

Gender: Male
Posts: 229


obbie
Crown race.. :/
« on: September 06, 2008, 21:10:19 PM »
Hi,

just got some new forks, but i cant seem to get the crown race of my old ones...

they are 07 DJ3's. there is a little indent thing, but it doesnt go further enough in so i cannot get underneath ot to wedge it out.

any suggestions as to how i can get it out?


Many Thanks,

Rob
Logged
Robington's New Ride Roll Eyes
Terminator.
God Like!
*****
Offline Offline

Gender: Male
Posts: 1752


^^ Yay:)


WWW
Re: Crown race.. :/
« Reply #1 on: September 06, 2008, 21:13:55 PM »
I usually use a chisel and tap it under the edge of the crown race then repeat from diff angles ect.
Logged
I want a pet midget that can kick himself in the head.
rock3gozy
Senior
****
Offline Offline

Posts: 353


SDH Rocks!
Re: Crown race.. :/
« Reply #2 on: September 06, 2008, 21:15:05 PM »
If you want to kep the forks looking perfect- good bike shop with one of these http://www.chainreactioncycles.com/Models.aspx?ModelID=27047

Otherwise, flat bladed screwdriver and drive it under the race with a hammer, working all the way around it gradually.
Logged
joed05
Junior
**
Offline Offline

Gender: Male
Posts: 96


Morzine 2008 was awesome!!
Re: Crown race.. :/
« Reply #3 on: September 06, 2008, 21:16:40 PM »
same as terminator, but hit it softly, when you put it on your new forks, use a piece of wood and tap it down around the CR gradually.
Logged
Boykake
Senior
****
Offline Offline

Gender: Male
Posts: 418


If youre not putting out, Im going riding
Re: Crown race.. :/
« Reply #4 on: September 06, 2008, 23:10:50 PM »
Quote from: Terminator. on September 06, 2008, 21:13:55 PM
I usually use a chisel and tap it under the edge of the crown race then repeat from diff angles ect.

Say bye bye to your working chisel  Roll Eyes flat blade screwdriver maybe? like rock3gozy suggested?

I wouldnt want to use a chisel after it had knocked a crown race off
Logged
Cheesegrater
Immortal
God Like!
******
Offline Offline

Gender: Male
Posts: 2845


Pot Noodle...YUM!
Re: Crown race.. :/
« Reply #5 on: September 06, 2008, 23:13:57 PM »
No no and no to all of the above. Find your self a decent size wood nail and tap it in 4 opposite places underneath the crown race.  Next time put some grease on the ID of the crown race when you put it on.
Logged
How about a little less questions and little more shut the hell up?
Crank Spin Racing
Terminator.
God Like!
*****
Offline Offline

Gender: Male
Posts: 1752


^^ Yay:)


WWW
Re: Crown race.. :/
« Reply #6 on: September 06, 2008, 23:19:05 PM »
Quote from: Boykake on September 06, 2008, 23:10:50 PM
Quote from: Terminator. on September 06, 2008, 21:13:55 PM
I usually use a chisel and tap it under the edge of the crown race then repeat from diff angles ect.

Say bye bye to your working chisel  Roll Eyes flat blade screwdriver maybe? like rock3gozy suggested?

I wouldnt want to use a chisel after it had knocked a crown race off
The chisel is about 6 years old and the handle is dying, It's of no other use.
Logged
I want a pet midget that can kick himself in the head.
Boykake
Senior
****
Offline Offline

Gender: Male
Posts: 418


If youre not putting out, Im going riding
Re: Crown race.. :/
« Reply #7 on: September 07, 2008, 11:08:01 AM »
Quote from: Terminator. on September 06, 2008, 23:19:05 PM
Quote from: Boykake on September 06, 2008, 23:10:50 PM
Quote from: Terminator. on September 06, 2008, 21:13:55 PM
I usually use a chisel and tap it under the edge of the crown race then repeat from diff angles ect.

Say bye bye to your working chisel  Roll Eyes flat blade screwdriver maybe? like rock3gozy suggested?

I wouldnt want to use a chisel after it had knocked a crown race off
The chisel is about 6 years old and the handle is dying, It's of no other use.

id still say its a bad idea.
Logged
Robington
Full Member
***
Offline Offline

Gender: Male
Posts: 229


obbie
Re: Crown race.. :/
« Reply #8 on: September 07, 2008, 15:36:17 PM »
SUCCESS!! Smiley

done it. used a hammer and an old knife to open the gap up a little and then screwdriver from there. also a little bit of WD40 into the mix Smiley JOb done.

Thanks for all the help guys, muchly appreciated.

Cheesy

x
Logged
Robington's New Ride Roll Eyes
hoernig
Full Member
***
Offline Offline

Gender: Male
Posts: 173
Re: Crown race.. :/
« Reply #9 on: September 07, 2008, 16:54:02 PM »
I assisted  Grin
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

advertisement.png, 0 kB
Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC Valid HTML 4.01! Valid CSS!
Page created in 0.124 seconds with 21 queries.