got a set of marzo bombers 98" i think, anyway the bolt holding the oil in has snapped at the bottom meaning the oil flows! and its messy... anyway where do i get a new bolt from,,,, please help!
http://www.pinkbike.com/photo/794928/
(dont worry there not that pink,,,,)

split the fork into

leg's
crown
steerer

now take the offending leg and strip it down to the carterage, if your LUCKY it will be a screw in type footnut, try and wedge out the offending stuck thread

if your unlucky, its a nut type footnut and you've snaped your carterage - 80 quid for a new one



or you can just bodge it?

yeh, snapped carterage i think mate... if its a nut with a rubber seal and its snapped off


your snapped the tread off your carterage, need a new one. ask around!

what you mean there not that pink ... they bloody well are ... i should know i painted them :d

bombers dont have cartriges, theyre an open system. you can strip the damping rod out, and replace just the damping rod. im pretty sure windwave can still get hardware for most marzocchi forks.

'bombers' eh? go back to school, the crap end of the marzocchi range uses SSV (aka pumped rods)  they are not a crap end fork. So please unless you have solid information dont post something undermining already posted statements! because you might be wrong, like in this case 

My old bike  , I have a damping cartridge lying about somewheres although not to sure if it would fit as it was of a set of 99 z1's which had 130mm travel, you could have it if you wanted, I swapped that for bens gt. Would someone clarify it would work?!

Sam x

no it wont work!

he runs carterages!

NOT RODS!